80 kW Stand-by Generator w/ Automatic Transfer Switch

80 kW Guardian Elite Commercial Series Liquid Cooled Automatic Standby Generator
This generator is ideal for a broad range of enterprises, including restaurants, convenience stores, supermarkets, banks, fitness centers, hotels, and retail outlets. Keep your business "in business" and protect your revenue stream by investing in a reliable yet affordable back-up power source. One of the quietest liquid cooled generators on the market this model features the exclusive patent-pending Whisper-Test low speed generator test cycle which reduces noise by 50%. Achieves near silent operation that satisfies all known sound ordinances.

Features:

• Liquid cooled engine produces more electricity for longer outages
• Whisper-Testâ„¢: Patent-pending, self-test feature makes the GUARDIAN Elite 50% quieter during the generator’s weekly self-test cycle
• Aluminum Enclosure: Corrosion resistance for coastal communities
• Longest life expectancy in the industry: Over 3,000 hours of run time
• Superior Paint: Tough, textured powder coat finish for unmatched durability and all weather protection
• UL listed
• Clean burning fuel: Natural gas or liquid propane vapor

Generator Specifications:

• Rated Power LPG (kW): 80
• Rated Power NG (kW): 80
• Amps @ 240V, 1 Phase: 333
• Amps @ 208V, 3 Phase: 278
• Amps @ 480V, 3 Phase: 120
• Voltage @ 60 Hz: (120/240, 1 Phase), (120/208, 3 Phase), (277/480, 3 Phase)
• Phase: Single and Three Phase
• Frequency: 60 Hz
• Engine/Alternator RPM: 3600/3600
• Engine: 4.6L V-8
• Fuel: Natural Gas or Liquid Propane Vapor
• Fuel Consumption LP (cu.ft/hr)/(gal/hr): 465/12.78
• Fuel Consumption NG (cu.ft/hr): 1154
• EPA CARB Certified: NO
• Engine Cooling: Liquid
• Controls: H-100
• UL 2200 (US and Canada): YES
• Main Line Circuit Breaker: 350,300,150 Amp
• Aluminum Enclosure Option: YES

400 Amp Automatic Transfer Switch (HTS-N)
This product makes the difference between a truly automatic generator set and just another generator. When the power goes out, this switch automatically senses the failure, turns on your generator, and routes electricity to the circuits of your home. No toggles to flip, no knobs to turn, no extension cords to run during a blackout. You will have the comfort and peace-of-mind knowing that your Guardian stand-by generator does everything for you...automatically!

Features:

• Single coil design, electrically operated and mechanically held
• Programmable exercise time
• SPDT aux contacts
• Main contacts are silver alloy
• Conformal coating protects the printed circuit board
• UL 1008 listed
• Indicating LED's for switch position, standby operating, and utility available
• 3 positions test switch: Fast test, auto, normal test
• Arc chutes on main contacts
• Signal before transfer contacts
• Rated to all classes of loads
• Remote start, stop and transfer through GenLink Communications Software

Specifications:

• Designed to operate in conjunction with the Generac H100 Series generator controller
• 2-wire RS485 communication link to the generator controller
• Switch operation is instigated by the generator controller
• All timers and voltage set points are programmable through GenLink Communications Software
• Standby Accept Voltage: 85-95%
• Standby Accept Frequency: 85-95%
• Nominal Voltage: 1 Volt Increments
• Allowable Deviation of Utility: 1 - 100%
• Line Interruption Delay: 1 - 10 seconds
• Engine Warmup Time: 1 - 300 seconds
• Minimum Run Time: 5 - 60 min.
• Return to Utility Timer: 1 - 30 min.
• Engine Cooldown Timer: 1 - 30 min.
• Signal Before Transfer Timer: 1 - 30 sec.
• Transfer Type: Inphase Time Delay Neurtal
• Terminal Lug Wire Contact Terminals: 600MCM - 4 AWG or (2)250MCM-1/0 AWG
• Number of Lugs: 4
• Maximum RMS Symmetrical Faul Current: Fuse - 200,000 Amps, Circuit Breaker - 35,000
• Maximum Fuse Size: 600 Amps
• Fuse Class: J, T

600 Amp Automatic Transfer Switch (HTS-N)
This product makes the difference between a truly automatic generator set and just another generator. When the power goes out, this switch automatically senses the failure, turns on your generator, and routes electricity to the circuits of your home. No toggles to flip, no knobs to turn, no extension cords to run during a blackout. You will have the comfort and peace-of-mind knowing that your Guardian stand-by generator does everything for you...automatically!

Features:

• Single coil design, electrically operated and mechanically held
• Programmable exercise time
• SPDT aux contacts
• Main contacts are silver alloy
• Conformal coating protects the printed circuit board
• UL 1008 listed
• Indicating LED's for switch position, standby operating, and utility available
• 3 positions test switch: Fast test, auto, normal test
• Arc chutes on main contacts
• Signal before transfer contacts
• Rated to all classes of loads
• Remote start, stop and transfer through GenLink Communications Software

Specifications:

• Designed to operate in conjunction with the Generac H100 Series generator controller
• 2-wire RS485 communication link to the generator controller
• Switch operation is instigated by the generator controller
• All timers and voltage set points are programmable through GenLink Communications Software
• Standby Accept Voltage: 85-95%
• Standby Accept Frequency: 85-95%
• Nominal Voltage: 1 Volt Increments
• Allowable Deviation of Utility: 1 - 100%
• Line Interruption Delay: 1 - 10 seconds
• Engine Warmup Time: 1 - 300 seconds
• Minimum Run Time: 5 - 60 min.
• Return to Utility Timer: 1 - 30 min.
• Engine Cooldown Timer: 1 - 30 min.
• Signal Before Transfer Timer: 1 - 30 sec.
• Transfer Type: Inphase Time Delay Neutral
• Terminal Lug Wire Contact Terminals: Two Lugs per pole - 500MCM - 1 AWG
• Number of Lugs: 8
• Maximum RMS Symmetrical Faul Current: Fuse - 200,000 Amps, Circuit Breaker - 42,000
• Maximum Fuse Size: 800 Amps
• Fuse Class: L, T

800 Amp Automatic Transfer Switch (HTS-N)
This product makes the difference between a truly automatic generator set and just another generator. When the power goes out, this switch automatically senses the failure, turns on your generator, and routes electricity to the circuits of your home. No toggles to flip, no knobs to turn, no extension cords to run during a blackout. You will have the comfort and peace-of-mind knowing that your Guardian stand-by generator does everything for you...automatically!

Features:

• Single coil design, electrically operated and mechanically held
• Programmable exercise time
• SPDT aux contacts
• Main contacts are silver alloy
• Conformal coating protects the printed circuit board
• UL 1008 listed
• Indicating LED's for switch position, standby operating, and utility available
• 3 positions test switch: Fast test, auto, normal test
• Arc chutes on main contacts
• Signal before transfer contacts
• Rated to all classes of loads
• Remote start, stop and transfer through GenLink Communications Software

Specifications:

• Designed to operate in conjunction with the Generac H100 Series generator controller
• 2-wire RS485 communication link to the generator controller
• Switch operation is instigated by the generator controller
• All timers and voltage set points are programmable through GenLink Communications Software
• Standby Accept Voltage: 85-95%
• Standby Accept Frequency: 85-95%
• Nominal Voltage: 1 Volt Increments
• Allowable Deviation of Utility: 1 - 100%
• Line Interruption Delay: 1 - 10 seconds
• Engine Warmup Time: 1 - 300 seconds
• Minimum Run Time: 5 - 60 min.
• Return to Utility Timer: 1 - 30 min.
• Engine Cooldown Timer: 1 - 30 min.
• Signal Before Transfer Timer: 1 - 30 sec.
• Transfer Type: Inphase Time Delay Neutral
• Terminal Lug Wire Contact Terminals: 4 Lugs per pole - 500MCM - 4/0 AWG
• Number of Lugs: 12
• Maximum RMS Symmetrical Faul Current: Fuse - 200,000 Amps, Circuit Breaker - 65,000
• Maximum Fuse Size: 1200 Amps
• Fuse Class: L