Generators

Low RPM generator power and weld speeds make this air-cooled engine drive unique. The Miller Legend 302 is great for service and maintenance trucks, in-plant use, and construction (especially in residential areas). 1800 RPM generator power uses up to 50% less fuel and produces 1/4 of the noise. Also, 120 VAC, 20 amps of power is available at all speeds and is independent of weld output. Multispeed weld output produces up to 240 amps at 3000 RPMs for reduced noise and up to 300 amps at 3600 RPMs for large diameter wires or CAC-A. Premium multiprocess weld performance delivers four-pole, three-phase arc quality with the ability to run at multiple engine speeds. A perfect blend of past Legend® features and current Trailblazer® features make this new Legend the perfect choice for running large diameter wire with a voltage-sensing feeder, low-speed generator use, and almost everything in between. Exclusive! Digital Meters with SunVision technology for easy reading in direct sunlight or shade. Self-calibrating digital weld meters with meter maintenance functions. Larger Fuel Capacity. New 12-gallon tank can keep the generator running for 14 hours with a 4000-watt load. Exclusive Smart Fuel Tank is designed to minimize the chance of back splash when refueling. Miller provides the strongest and most reliable generator power. Our Accu-Rated, not inflated, standard for measuring generator power guarantees delivery of all the power its machine promises.

Engine = Kohler 23 HP (gas), Kohler 20 HP (LP), 1800/3000 RPM, 2400/3600 RPM (idle/weld speed)

GFCI = Machine comes with two GFCI (Ground Fault Circuit Interruptors) 120 VAC duplex receptacles.

ELEC FUEL PUMP = Electric Fuel Pump for High Altitude

LP Gas = Model runs off of LP Gas. Does not include tank, bracket, or hose from tank to converter.

Applications:

• Industrial Applications:
  • Fabrication
  • Structural Steel Work
  • Process Plant Piping
  • Maintenance

Process:

• Stick (SMAW)
• MIG (GMAW) *
• Flux Cored (FCAW) *
• DC TIG (DC GTAW)
• Air Carbon Arc (CAC-A) Cutting and Gouging (3/16 in carbons)

  * with voltage-sensing feeder

Specifications:

• Rated Output at 104° F:
  • DC Stick/TIG: 280 A at 25 V, 100% duty cycle
  • MIG/FCAW: 300 A at 25 V, 100% duty cycle
• Output Power Range:
  • DC Stick: 10-300 A
  • DC TIG: 10-300 A
  • MIG/FCAW: 10-33 V
• Generator Power- rated at 104°F:
  • Peak: 5500 watts at 1800 RPM, 60 Hz
  • Continuous: 5000 watts at 1800 RPM, 60 Hz
• Engine:
  • Kohler 23 HP (gas)
  • Kohler 20 HP (LP)
• Dimensions:
  • H: 33 in
  • W: 20 in
  • D: 45 1/2 in
• Net Weight: 580 lbs

Warranty:

• Welder/generator is warranted for 3 years, parts and labor
• Engine is warranted separately by the engine manufacturer