Spectrum 375 Plasma Cutter, 1- Phase, 27 A at 35%

The Spectrum 375 comes with the Electronic Pilot Arc Controller which automatically controls the pilot circuit to provide expanded metal cutting ability without having to re-trigger the torch, increasing productivity and extending tip life. Dual input voltage allow either 115 or 230 VAC input power and provides patented protection in case of incorrect switch position. LVC line voltage compensation provides peak performance power under variable conditions (98 to 132 volts) for steady cuts and cleaner ending cuts. Can be powered by any Miller engine drive with generator power (e.g. Bobcat) or equivalent competitive equipment. Blow Back Torch Design, the plasma arc is created by pulling an electrical arc between an electrode and tip. This process eliminates high frequency by forcing an electrical arc between the two pieces. Post Flow Cooling Circuit provides protection to extend the life of consumables and the welding torch is enhanced by our post flow circuit that provides shielding gas after you release the trigger.

Features:

• Plasma cutter
• ICE-27C hand-held torch with 20 ft (6.1 m) cable.
• Heavy-duty work clamp with 20 ft (6.1 m) cable
• 10 ft power cord with 115 VAC, 20 A plug
• Extra consumables (3 electrodes, 3 tips, and 1 air fitting)
• Built-in gas/air filter and regulator

Applications:

• Industrial Applications:
  • Auto Body
  • Maintenance
  • Fabrication
  • Light Construction
  • HVAC Ductwork
  • Prototyping

Process:

• Air Plasma Cutting

Specifications:

• Cutting Capability:
  • 1/16 in Stand off Cutting...Drag Cutting
  • Rated: 3/8 in (10mm)... 5/16 in (8mm)
  • Quality: 1/2 in (13mm) ... 3/8 in (10mm)
  • Sever: 5/8 in (16mm)... 1/2 in (13mm)
• Input Power: 115 - 230 V 1 Phase
• Input Amperage Circuit Requirement: A 120 volt, 20 amp (min.) - 30 amp recommended or 230 volt, 15 amp (min.) individual branch circuit
• Required Input Pressure/Flow: 4.5 SCFM min. (129 L/min.) at 90-120 PSI (620-827 kPa) 120 PSI MAX (828 kPa)
• Rated Output at 104° F (40°C): 27 A at 90 VDC, 35% Duty Cycle
• Dimensions:
  • H: 13 1/2 in
  • W: 8 1/2 in
  • D: 16 in
• Net Weight with torch: 55 lbs

Warranty:

• Power source is warranted for 3 years, parts and labor
• ICE torch is warranted for 1 year, parts and labor