The Powermax1000 plasma cutting system cuts over 50% faster than any other competitor tested on 3/4." The Powermax1000's Auto-voltage circuit 60-amp, 8.4-kilowatt output provides ample power for clean, quick cutting. Auto-voltage runs on voltages from 200 to 600 volts, 1 or 3 phase, without the need for manual rewiring. New boost conditioner circuit compensates for input voltage variation.
Features:
60 amps, 8.4 kW output
Auto-voltage circuit
Boost Conditioner circuit
Standard CNC interface
Pilot arc controller with deactivation switch
Dual-threshold pilot arc circuit
Gouging metal removal rate of 11 lbs. (4.9 kg) per hour
Includes:
Power supply
T60 torch with 25’ leads
Spare consumables
Work cable and clamp 15’ (4.6 mm)
Primary power cable
Benefits:
Mechanical and electrical designs are validated through aggressive, accelerated testing
New fan-on-demand feature minimizes dust ingestion
Chemically cross-linked torch cable jacket provides improved resistance to molten spray
Specifications:
CSA/NRTL and CE certifications comply with the highest safety standards
IP23CS compliance for resistance to rain damage
Hand torch cut capacity:
Recommended: up to 3/4" (19 mm) at cutting speeds of 22" (559 mm) per minute
Maximum: up to 1" (25 mm) at cutting speeds of 12" (304 mm) per minute
Severance: up to 1-1/4" (32 mm) at slow speed
Machine torch cut capacity:
Recommended: up to 3/8" (10 mm)
Maximum: up to 1/2" (12 mm) (Cutting above requires an edge start)
Specifications:
Dimensions: 19.6” H x 10.7” W x 23.1” D
Weight with torch: 83 lbs
1000 is backed by a full three-year power supply warranty and a one-year torch warranty. No parts excluded.
Powermax1000
