The Handler 125 EZ has Hobart’s unique Single-Knob Control making it the quickest and easiest wire welder to set up and use. Just plug it into 115 VAC, select the mild steel thickness with the Single Knob Control and you are ready to weld. The Handler 125 EZ comes ready to weld 18 gauge–3/16 in mild steel with .030 in (0.8 mm) self-shielding flux-cored wire so no shielding gas bottle is required. Also designed to use .035 in (0.9 mm) flux cored wire with a .035 in (0.9 mm) contact tip.
Features:
- Includes: comfortable H-9A gun, 8' Spare .030" contact tips, 10' work cable with clamp, sample spool of .030" self-shielding flux cored wire, spool shaft to accommodate 4" spools and power cord with plug
- Power: CV, DC, 1 Phase
- Processes: Flux Cored (FCAW)
- Material Thickness: Welds 18 gauge up to 3/16"
- Skill Level: Low
- Applications: Farm/Ranch,
Light Maintenance and Repair,
Light Fabrication
Specifications:
- Rated Output at 20% Duty Cycle: 90 A at 19 VDC, 63 A at 21 VDC (CSA Rating)
- Current Range: 30-125 A
- Max. Open-Circuit Voltage: 29 V
- Wire Feed Speed Range: 0-415 IPM,
0-500 IPM at no load
Manufacturer Warranty: 5 years
Handler_125_EZ
Hobart Welders' Warranty
