General’s line of portable air blowers can accommodate most non-hazardous confined space ventilation requirements. Select from 8 inch and 12 inch diameter units with power choice of gasoline, 12 VDC or 115 VAC. Both radial and axial configurations available for the most demanding air flow applications. There are no plastic frame parts to crack. This BLOW-R-PAC Non-Hazardous Location Air Ventilation Blower with 8" x 25' Flexible Duct is constructed with heavy gauge aluminum and steel. All General blowers offer laboratory certified air flow rates with independent, third-party testing.
Features:
- Complete with 8 inch diameter x 25 foot flexible duct and integral storage canister
- BLOW-R-PAC
- Permanent magnet motor
- 50 ampere battery terminal connections
- 8 inch outlet diameter
- 12 gauge
- lockable cover
- Spun steel blower diameter
- Aluminum and composite fan construction
- Rubber anti-vibration mounting
Specifications:
- Engine Type: 1/6 HP (.13kw), 12Volt, DC
- RPM: 3450
- Speed Control: Single Speed
- Blower Type: Radial
- Material: Spun Steel
- Wheel Type: Aluminum/plastic MultiWing axial
- Size: 8 inch (203 mm) Nominal Diam. inlet/ Outlet
- Mounting: Rubber
- Type: Anti-Vibration
- Free Air: 833.1 CFM (32.8 cmm)
- One 90 Degree Bend: 659.5 CFM (18.4 cmm)
- Two: 90 Degree Bends: 545.6 CFM
- Weight: 57 lbs
- Overall Dimensions: 17"H x 13"W x 38"D
Warranty:
8" x 3' Standard Duct
- 8 inch nominal diameter x 3 foot length
- Vinyl coated, synthetic fabric construction for extra service
- Wire helix reinforcement with anti-scuff strip
- Complete with cuff and securing straps on both ends
- For use in non-hazardous locations only
8" x 6' Standard Duct
- 8 inch nominal diameter x 6 foot length
- Vinyl coated, synthetic fabric construction for extra service
- Wire helix reinforcement with anti-scuff strip
- Complete with cuff and securing straps on both ends
- For use in non-hazardous locations only
8" x 15' Standard Duct
- 8 inch nominal diameter x 15 foot length
- Vinyl coated, synthetic fabric construction for extra service
- Wire helix reinforcement with anti-scuff strip
- Complete with cuff and securing straps on both ends
- For use in non-hazardous locations only
8" x 25' Standard Duct
- 8 inch nominal diameter x 25 foot length
- Vinyl coated, synthetic fabric construction for extra service
- Wire helix reinforcement with anti-scuff strip
- Complete with cuff and securing straps on both ends
- For use in non-hazardous locations only
8" x 15' Insulated Duct
- 8 inch nominal diameter x 15 foot length
- Neoprene coated, synthetic fabric, high thermal rated urethane/polyester foam insulation
- -40o F to +250o F temperature range
- Wire helix reinforcement with anti-scuff strip
- Complete with nylon ring and securing strap on opposite ends
- For use in non-hazardous locations only
8" x 25' Insulated Duct
- 8 inch nominal diameter x 25 foot length
- Neoprene coated, synthetic fabric, high thermal rated urethane/polyester foam insulation
- -40o F to +250o F temperature range
- Wire helix reinforcement with anti-scuff strip
- Complete with nylon ring and securing strap on opposite ends
- For use in non-hazardous locations only
8" Duct Couplers
- Allows two lengths of 8 inch nominal diameter flexible duct to be attached together with clamps
- Heavy duty
- 24 gauge
- Galvanized or stainless steel construction
- For use in non-hazardous locations only
- Increased duct length can substantially reduce air flow rate
8" x 15' Collapsible Duct
- 8 inch nominal diameter x 15 foot length
- Same physical appearance and construction of standard ducts
- Flexible helix section deforms to allow personnel to egress the manhole without permanent duct damage
- For use in non-hazardous locations only
8" x 25' Collapsible Duct
- 8 inch nominal diameter x 25 foot length
- Same physical appearance and construction of standard ducts
- Flexible helix section deforms to allow personnel to egress the manhole without permanent duct damage
- For use in non-hazardous locations only
Storage Canister, for use with both FD815 and FD825 collapsible ducts
- Heavy duty
- 16 gauge
- welded steel construction with lockable cover and carry handle
- Bright enamel finish
- For use in non-hazardous locations only
Storage Rack, for use with FD815, FD825 and ICD815 collapsible ducts
- Heavy duty
- 11 gauge
- Welded steel construction
- Bright enamel finish
- For use in non-hazardous locations only
Storage Rack for ICD825
- Heavy duty
- 11 gauge
- Welded steel construction
- Bright enamel finish
- For use in non-hazardous locations only
We Now Ship to Canada!
Ships to Canada
