This model is designed to accommodate most non hazardous confined space ventilation requirements. This 8" AC Electric, Portable Ventilation Blower is built with heavy-gauge aluminum and steel construction. Applicable models are certified by Canadian Standards Association (CSA). This General Equipment model offers independent laboratory certified air flow rates.
Features:
- Built with heavy-gauge aluminum and steel construction
- CSA certified
- 8 inch nominal inlet and outlet diameter
- Independent laboratory certified air flow rates
- Less duct.
Specifications:
- Engine: 1/3 HP (23kw), 60Hz, 115 Volts, AC, Single Phase
- RPM: 1725
- Speed Control: Single Speed
- Blower Type: Radial
- Material: Cast aluminum
- Wheel Type: Steel
- Size: 8 inch (203 mm) Nominal Diam. inlet/ Outlet
- Mounting: Rubber
- Type: Anti-Vibration
- Free Air: 1277.4 CFM (35.7 cmm)
- One 90 Degree Bend: 738 CFM (20.7 cmm)
- Two: 90 Degree Bends: 578.8 CFM (16.2 cmm)
- Weight: 53 lbs
- Overall Dimensions: 19"H x 20"W x 19"D
Warranty:
EP8_Manual
8" x 3' Standard Duct
- 8 inch nominal diameter x 3 foot length
- Vinyl coated, synthetic fabric construction for extra service
- Wire helix reinforcement with anti-scuff strip
- Complete with cuff and securing straps on both ends
- For use in non-hazardous locations only
8" x 6' Standard Duct
- 8 inch nominal diameter x 6 foot length
- Vinyl coated, synthetic fabric construction for extra service
- Wire helix reinforcement with anti-scuff strip
- Complete with cuff and securing straps on both ends
- For use in non-hazardous locations only
8" x 15' Standard Duct
- 8 inch nominal diameter x 15 foot length
- Vinyl coated, synthetic fabric construction for extra service
- Wire helix reinforcement with anti-scuff strip
- Complete with cuff and securing straps on both ends
- For use in non-hazardous locations only
8" x 25' Standard Duct
- 8 inch nominal diameter x 25 foot length
- Vinyl coated, synthetic fabric construction for extra service
- Wire helix reinforcement with anti-scuff strip
- Complete with cuff and securing straps on both ends
- For use in non-hazardous locations only
8" x 15' Insulated Duct
- 8 inch nominal diameter x 15 foot length
- Neoprene coated, synthetic fabric, high thermal rated urethane/polyester foam insulation
- -40o F to +250o F temperature range
- Wire helix reinforcement with anti-scuff strip
- Complete with nylon ring and securing strap on opposite ends
- For use in non-hazardous locations only
8" x 25' Insulated Duct
- 8 inch nominal diameter x 25 foot length
- Neoprene coated, synthetic fabric, high thermal rated urethane/polyester foam insulation
- -40o F to +250o F temperature range
- Wire helix reinforcement with anti-scuff strip
- Complete with nylon ring and securing strap on opposite ends
- For use in non-hazardous locations only
8" Duct Couplers
- Allows two lengths of 8 inch nominal diameter flexible duct to be attached together with clamps
- Heavy duty
- 24 gauge
- Galvanized or stainless steel construction
- For use in non-hazardous locations only
- Increased duct length can substantially reduce air flow rate
8" x 15' Collapsible Duct
- 8 inch nominal diameter x 15 foot length
- Same physical appearance and construction of standard ducts
- Flexible helix section deforms to allow personnel to egress the manhole without permanent duct damage
- For use in non-hazardous locations only
8" x 25' Collapsible Duct
- 8 inch nominal diameter x 25 foot length
- Same physical appearance and construction of standard ducts
- Flexible helix section deforms to allow personnel to egress the manhole without permanent duct damage
- For use in non-hazardous locations only
Storage Canister, for use with both FD815 and FD825 collapsible ducts
- Heavy duty
- 16 gauge
- welded steel construction with lockable cover and carry handle
- Bright enamel finish
- For use in non-hazardous locations only
Storage Rack, for use with FD815, FD825 and ICD815 collapsible ducts
- Heavy duty
- 11 gauge
- Welded steel construction
- Bright enamel finish
- For use in non-hazardous locations only
Storage Rack for ICD825
- Heavy duty
- 11 gauge
- Welded steel construction
- Bright enamel finish
- For use in non-hazardous locations only
We Now Ship to Canada!
Ships to Canada
