This steel generator is ideal for a broad range of enterprises, including restaurants, convenience stores, supermarkets, banks, fitness centers, hotels, and retail outlets. Keep your business "in business" and protect your revenue stream by investing in a reliable yet affordable back-up power source. One of the quietest liquid cooled generators on the market this model features the exclusive patent-pending Whisper-Test low speed generator test cycle which reduces noise by 50%. Achieves near silent operation that satisfies all known sound ordinances.
Features:
- Steel enclosure
- Liquid cooled engine produces more electricity for longer outages
- Whisper-Test™: Patent-pending, self-test feature makes the GUARDIAN Elite 50% quieter during the generator’s weekly self-test cycle
- Longest life expectancy in the industry: Over 3,000 hours of run time
- Superior Paint: Tough, textured powder coat finish for unmatched durability and all weather protection
- UL listed
- Clean burning fuel: Natural gas or liquid propane vapor
Generator Specifications:
- Rated Power LPG (kW): 80
- Rated Power NG (kW): 80
- Amps @ 240V, 1 Phase: 333
- Amps @ 208V, 3 Phase: 278
- Amps @ 480V, 3 Phase: 120
- Voltage @ 60 Hz: (120/240, 1 Phase), (120/208, 3 Phase), (277/480, 3 Phase)
- Phase: Single and Three Phase
- Frequency: 60 Hz
- Engine/Alternator RPM: 3600/3600
- Engine: 4.6L V-8
- Fuel: Natural Gas or Liquid Propane Vapor
- Fuel Consumption LP (cu.ft/hr)/(gal/hr): 465/12.78
- Fuel Consumption NG (cu.ft/hr): 1154
- EPA CARB Certified: NO
- Engine Cooling: Liquid
- Controls: H-100
- UL 2200 (US and Canada): YES
- Main Line Circuit Breaker: 350,300,150 Amp
An Automatic Transfer Switch makes the difference between a truly automatic generator set and just another generator. When the power goes out, this switch automatically senses the failure, turns on your generator, and routes electricity to the circuits of your home. No toggles to flip, no knobs to turn, no extension cords to run during a blackout. You will have the comfort and peace-of-mind knowing that your Guardian stand-by generator does everything for you...automatically!
Automatic Transfer Switch (HTS-N) Features:
- Single coil design, electrically operated and mechanically held
- Programmable exercise time
- SPDT aux contacts
- Main contacts are silver alloy
- Conformal coating protects the printed circuit board
- UL 1008 listed
- Indicating LED's for switch position, standby operating, and utility available
- 3 positions test switch: Fast test, auto, normal test
- Arc chutes on main contacts
- Signal before transfer contacts
- Rated to all classes of loads
- Remote start, stop and transfer through GenLink Communications Software
100 Amp Automatic Transfer Switch (HTS-N) Specifications:
- Designed to operate in conjunction with the Generac H100 Series generator controller
- 2-wire RS485 communication link to the generator controller
- Switch operation is instigated by the generator controller
- All timers and voltage set points are programmable through GenLink Communications Software
- Standby Accept Voltage: 85-95%
- Standby Accept Frequency: 85-95%
- Nominal Voltage: 1 Volt Increments
- Allowable Deviation of Utility: 1 - 100%
- Line Interruption Delay: 1 - 10 seconds
- Engine Warmup Time: 1 - 300 seconds
- Minimum Run Time: 5 - 60 min.
- Return to Utility Timer: 1 - 30 min.
- Engine Cooldown Timer: 1 - 30 min.
- Signal Before Transfer Timer: 1 - 30 sec.
- Transfer Type: Inphase Time Delay Neutral
- Terminal Lug Wire Contact Terminals: 2/0 - 14 AWG
- Number of Lugs: 4
- Maximum RMS Symmetrical Faul Current: Fuse - 200,000 Amps, Circuit Breaker - 14,000
- Maximum Fuse Size: 200 Amps
- Fuse Class: J, T
150 Amp Automatic Transfer Switch (HTS-N) Specifications:
- Designed to operate in conjunction with the Generac H100 Series generator controller
- 2-wire RS485 communication link to the generator controller
- Switch operation is instigated by the generator controller
- All timers and voltage set points are programmable through GenLink Communications Software
- Standby Accept Voltage: 85-95%
- Standby Accept Frequency: 85-95%
- Nominal Voltage: 1 Volt Increments
- Allowable Deviation of Utility: 1 - 100%
- Line Interruption Delay: 1 - 10 seconds
- Engine Warmup Time: 1 - 300 seconds
- Minimum Run Time: 5 - 60 min.
- Return to Utility Timer: 1 - 30 min.
- Engine Cooldown Timer: 1 - 30 min.
- Signal Before Transfer Timer: 1 - 30 sec.
- Transfer Type: Inphase Time Delay Neutral
- Terminal Lug Wire Contact Terminals: 400MCM - 4 AWG
- Number of Lugs: 4
- Maximum RMS Symmetrical Faul Current: Fuse - 200,000 Amps, Circuit Breaker - 25,000
- Maximum Fuse Size: 400 Amps
- Fuse Class: J, T
200 Amp Automatic Transfer Switch (HTS-N) Specifications:
- Designed to operate in conjunction with the Generac H100 Series generator controller
- 2-wire RS485 communication link to the generator controller
- Switch operation is instigated by the generator controller
- All timers and voltage set points are programmable through GenLink Communications Software
- Standby Accept Voltage: 85-95%
- Standby Accept Frequency: 85-95%
- Nominal Voltage: 1 Volt Increments
- Allowable Deviation of Utility: 1 - 100%
- Line Interruption Delay: 1 - 10 seconds
- Engine Warmup Time: 1 - 300 seconds
- Minimum Run Time: 5 - 60 min.
- Return to Utility Timer: 1 - 30 min.
- Engine Cooldown Timer: 1 - 30 min.
- Signal Before Transfer Timer: 1 - 30 sec.
- Transfer Type: Inphase Time Delay Neutral
- Terminal Lug Wire Contact Terminals: 400MCM - 4 AWG
- Number of Lugs: 4
- Maximum RMS Symmetrical Faul Current: Fuse - 200,000 Amps, Circuit Breaker - 25,000
- Maximum Fuse Size: 400 Amps
- Fuse Class: J, T
300 Amp Automatic Transfer Switch (HTS-N) Specifications:
- Designed to operate in conjunction with the Generac H100 Series generator controller
- 2-wire RS485 communication link to the generator controller
- Switch operation is instigated by the generator controller
- All timers and voltage set points are programmable through GenLink Communications Software
- Standby Accept Voltage: 85-95%
- Standby Accept Frequency: 85-95%
- Nominal Voltage: 1 Volt Increments
- Allowable Deviation of Utility: 1 - 100%
- Line Interruption Delay: 1 - 10 seconds
- Engine Warmup Time: 1 - 300 seconds
- Minimum Run Time: 5 - 60 min.
- Return to Utility Timer: 1 - 30 min.
- Engine Cooldown Timer: 1 - 30 min.
- Signal Before Transfer Timer: 1 - 30 sec.
- Transfer Type: Inphase Time Delay Neurtal
- Terminal Lug Wire Contact Terminals: 600MCM - 4 AWG or (2)250MCM-1/0 AWG
- Number of Lugs: 4
- Maximum RMS Symmetrical Faul Current: Fuse - 200,000 Amps, Circuit Breaker - 35,000
- Maximum Fuse Size: 600 Amps
- Fuse Class: J, T
400 Amp Automatic Transfer Switch (HTS-N) Specifications:
- Designed to operate in conjunction with the Generac H100 Series generator controller
- 2-wire RS485 communication link to the generator controller
- Switch operation is instigated by the generator controller
- All timers and voltage set points are programmable through GenLink Communications Software
- Standby Accept Voltage: 85-95%
- Standby Accept Frequency: 85-95%
- Nominal Voltage: 1 Volt Increments
- Allowable Deviation of Utility: 1 - 100%
- Line Interruption Delay: 1 - 10 seconds
- Engine Warmup Time: 1 - 300 seconds
- Minimum Run Time: 5 - 60 min.
- Return to Utility Timer: 1 - 30 min.
- Engine Cooldown Timer: 1 - 30 min.
- Signal Before Transfer Timer: 1 - 30 sec.
- Transfer Type: Inphase Time Delay Neurtal
- Terminal Lug Wire Contact Terminals: 600MCM - 4 AWG or (2)250MCM-1/0 AWG
- Number of Lugs: 4
- Maximum RMS Symmetrical Faul Current: Fuse - 200,000 Amps, Circuit Breaker - 35,000
- Maximum Fuse Size: 600 Amps
- Fuse Class: J, T
600 Amp Automatic Transfer Switch (HTS-N) Specifications:
- Designed to operate in conjunction with the Generac H100 Series generator controller
- 2-wire RS485 communication link to the generator controller
- Switch operation is instigated by the generator controller
- All timers and voltage set points are programmable through GenLink Communications Software
- Standby Accept Voltage: 85-95%
- Standby Accept Frequency: 85-95%
- Nominal Voltage: 1 Volt Increments
- Allowable Deviation of Utility: 1 - 100%
- Line Interruption Delay: 1 - 10 seconds
- Engine Warmup Time: 1 - 300 seconds
- Minimum Run Time: 5 - 60 min.
- Return to Utility Timer: 1 - 30 min.
- Engine Cooldown Timer: 1 - 30 min.
- Signal Before Transfer Timer: 1 - 30 sec.
- Transfer Type: Inphase Time Delay Neurtal
- Terminal Lug Wire Contact Terminals: Two Lugs per pole - 500MCM - 1 AWG
- Number of Lugs: 8
- Maximum RMS Symmetrical Faul Current: Fuse - 200,000 Amps, Circuit Breaker - 42,000
- Maximum Fuse Size: 800 Amps
- Fuse Class: L, T
800 Amp Automatic Transfer Switch (HTS-N) Specifications:
- Designed to operate in conjunction with the Generac H100 Series generator controller
- 2-wire RS485 communication link to the generator controller
- Switch operation is instigated by the generator controller
- All timers and voltage set points are programmable through GenLink Communications Software
- Standby Accept Voltage: 85-95%
- Standby Accept Frequency: 85-95%
- Nominal Voltage: 1 Volt Increments
- Allowable Deviation of Utility: 1 - 100%
- Line Interruption Delay: 1 - 10 seconds
- Engine Warmup Time: 1 - 300 seconds
- Minimum Run Time: 5 - 60 min.
- Return to Utility Timer: 1 - 30 min.
- Engine Cooldown Timer: 1 - 30 min.
- Signal Before Transfer Timer: 1 - 30 sec.
- Transfer Type: Inphase Time Delay Neurtal
- Terminal Lug Wire Contact Terminals: 4 Lugs per pole - 500MCM - 4/0 AWG
- Number of Lugs: 12
- Maximum RMS Symmetrical Faul Current: Fuse - 200,000 Amps, Circuit Breaker - 65,000
- Maximum Fuse Size: 1200 Amps
- Fuse Class: L
See Similar Products:
Dimensions & Weights
|
|
|
| 80 kW Generac Liquid-Cooled Generator, CSA, EPA Compliant in Steel |
54.8" H x 36.8" W x 115.2" D |
2010 lbs |
| 100 Amp Automatic Transfer Switch (HTS-N) |
36" H x 24" W x 10" D |
180 lbs |
| 150 Amp Automatic Transfer Switch (HTS-N) |
36" H x 24" W x 10" D |
185 lbs |
| 200 Amp Automatic Transfer Switch (HTS-N) |
36-48" H x 24-30" W x 10-12" D |
185-265 lbs |
| 300 Amp Automatic Transfer Switch (HTS-N) |
Unavailable |
245-325 lbs |
| 400 Amp Automatic Transfer Switch (HTS-N) |
Unavailable |
245-325 lbs |
| 600 Amp Automatic Transfer Switch (HTS-N) |
Unavailable |
650 lbs |
| 800 Amp Automatic Transfer Switch (HTS-N) |
Unavailable |
650 lbs |
Generac:
FREE SHIPPING ON ALL GENERAC STANDBY UNITS AND LIFT GATE IS FREE TOO!
Since 1959, Generac Power Systems, Inc. has been a leading, innovative manufacturer and marketer of portable and standby generators, automatic transfer switches, modular paralleling systems, and small engines for recreational vehicle, residential, and commercial applications. Generac’s power systems range in output from 2 to 9,000 kilowatts.
World class manufacturing is dynamic. To sustain one's reputation as a trailblazer, one must accept change. Generac views change as opportunity, and opportunity is the motivation that drives our workforce to succeed. Generac employees are encouraged to be imaginative... in their suggestions to improve efficiencies, in their desire to incorporate new technologies and in their quest to broaden their contributions.
This willingness and ability to achieve at an elevated level defines Generac's culture and is most easily seen in the products they build. That's why Generac Power Systems remains the undisputed leader in the residential market. Today,
Generac sells more automatic home standby generators than all of our competitors combined.
It is also why Generac revolutionized the commercial market, by creating the first product line geared specifically to the needs of small and mid-sized businesses.
Generac is the company that recognized the demand for industrial power solutions that boast redundancy, reliability, and flexibility. In response, Generac has created numerous award-winning products, relying on creativity and innovation to see them through.
And Generac is the company that was chosen above all others to supply back-up power to the nation's largest telecommunications networks.
Generac Power Systems is proud to be a multiple recipient of Milwaukee Magazine's "Best Places to Work" award for Southeastern Wisconsin.
More on Generac...
General Shipping Information:
- Shipping EstimateView
- Stock Status:View
-
Ships to:
- Ship Method:Truck Freight
- Upgrade Available?
No
Truck Freight Additional Information:
This product is too heavy/large to ship via the small package delivery services (e.g. UPS, FedEx) so it will be sent to you via truck freight. Truck freight is different than standard UPS, FedEx or US Mail in that you will be responsible for carrying the product from the back of the truck into your house (or wherever it's going).
The most important thing to remember about truck freight is that you MUST inspect the package at the time of delivery. If the box has any damage, or if there is any reason for you to be at all concerned about damage, please write "PRODUCT DAMAGED" clearly on the sheet that they ask you to sign. This simply insures that if there is any damage, it will be easy to take care of the problem.
If you are ordering a very large item, please keep in mind that you may need a couple of people to help unload it. Alternatively, most truck freight companies offer additional services to help you move items from the truck into your house. Once we email you the tracking information you can contact the shipper directly to inquire about additional services. You would be responsible for directly paying the truck freight carrier for any additional services.
