This industrial towable generator is designed and engineered for optimum performance and superior reliability. From the ultra quiet sound attenuated enclosures to the state-of-the-art electronics and controls, this unit is designed to meet the most rugged conditions. This full-featured unit is specially suited for all industrial, commercial and rental applications. Can also be used with an automatic transfer switch for standby applications.
Features:
- Large integral fuel tank
- Overspeed shutdown
- Extra large access doors
- Manual or automatic start
- Available with or without the trailer
- High water temperature shutdown
- Overcrank lockout
- Battery included
- Voltage Selections: Three-position switch, no reconnection required
- Low oil pressure shutdown
- Fuel water seperators
- Single point lifting eye
Specifications:
Engine Specifications:
- Engine: John Deere
- Model: 4045TF275
- Cylinders: 4
- Induction System: Turbocharged
- Displacement (Liters/Cu. In.): 4.5/276
- Hp @ Rated Speed: 102
- RPM: 1800
- Bore and Stroke: 4.2" x 5.0"
- Oil Capacity (with filter): 14.0 quarts
- Cooling: Liquid
- EPA Emmisions Level: Tier 2
- Battery minimum cold cranking amps (supplied): 925
Standby Output:
- 3 ph @ 480 Volt (kVA/kW): 81/65
- 3 ph @ 208 or 240 Volt (kVA/kW): 72/58
- 1 ph @ 240 Volt (kVA/kW): 45/45
Prime Output:
- 3 ph @ 480 Volt (kVA/kW): 75/60
- 3 ph @ 208 or 240 Volt (kVA/kW): 69/55
- 1 ph @ 240 Volt (kVA/kW): 43/43
Voltage Selections:
- Voltage 3 Ph Adjustable: 208/220/240/416/440/460/480
- Voltage 1 Ph Adjustable: 120/127/139/240/254/277
- 3-Phase Power Factor: 0.8
- Voltage Regulation: 1/2%
- Frequency: 60 Hz
- Total Harmonic Distortion: <5%
- Insulation Material: Class H
Amperage (Prime):
- 3 ph @ 480 Volt: 90.2
- 3 ph @ 240 Volt: 165.4
- 3 ph @ 208 Volt: 190.8
- Single phase amperage @ 240V/120V: 179/179
Receptacle Specifications:
- 120 Volt 20 Amp Duplex GFCI: 3
- 120/240 Volt 50 Amp CS6369 Twistlock: 3
- Two Wire Remote Start Capability: Standard
Fuel System Specifications (Diesel):
- Fuel Consumption GPH-1/2 Load/(full load): 3.1/(6.3)
- Approximate Run Time (Hours) 1/2 load/(full load) @ Standby Rating: 26/(13)
- Fuel Capacity (Ga.): 80
Capacity and Dimensions:
- Sound Level dBA (Avg.) @ 7 meters, full load: 67
- Dimensions (LxWxH) with trailer: 147" x 62" x 85"
- Dimensions (LxWxH) without trailer: 84" x 38" x 61"
- Weight without Fuel (lbs): 4,020
- Weight without Fuel and without Trailer (lbs): 3,180
- Warning: Do not connect generator to any building's electrical system unless a disconnect switch has been installed. Follow local and national electrical codes for proper installation.
See Similar Products:
Dimensions & Weights
|
|
|
| 65 kW Industrial Standby Towable Generator |
61" H x 38" W x 84" D |
3180 lbs |
Baldor:
As the single largest motor manufacturer in the world, Baldor Electric is no stranger to success. Since 1920, Baldor’s success formula has revolved around creating the highest quality products, and achieving absolute customer satisfaction. By constantly innovating their products and setting industry-standards in environmental protection requirements, Baldor has not only earned the trust from their customers, but has also received recognition for the motor industry at large. In 1998, the “Product of the Year” award was given by Plant Engineering Magazine, for Baldor’s achievements with the Standard-E motors. Baldor’s entire North American network of operations—including warehouse inventories, as well as corporate and customer data—is accessible through the Baldor Unified System (BUS), a customized computer system. This allows Baldor Electric to run operations as one nationwide cohesive unit, so that they can meet their one all-time goal: satisfying their customers with excellent service and quality products.
More on Baldor...
General Shipping Information:
- Shipping EstimateView
- Stock Status:View
-
Ships to:
- Ship Method:Truck Freight
- Upgrade Available?
No
Truck Freight Additional Information:
This product is too heavy/large to ship via the small package delivery services (e.g. UPS, FedEx) so it will be sent to you via truck freight. Truck freight is different than standard UPS, FedEx or US Mail in that you will be responsible for carrying the product from the back of the truck into your house (or wherever it's going).
The most important thing to remember about truck freight is that you MUST inspect the package at the time of delivery. If the box has any damage, or if there is any reason for you to be at all concerned about damage, please write "PRODUCT DAMAGED" clearly on the sheet that they ask you to sign. This simply insures that if there is any damage, it will be easy to take care of the problem.
If you are ordering a very large item, please keep in mind that you may need a couple of people to help unload it. Alternatively, most truck freight companies offer additional services to help you move items from the truck into your house. Once we email you the tracking information you can contact the shipper directly to inquire about additional services. You would be responsible for directly paying the truck freight carrier for any additional services.
By the pit
from jackson ms
About Me Avid Do-It-Yourselfer
- Easy to Start
- Powerful
- Quiet
- Construction Sites
- Power Outages
